How to Install the Dimensional Fire Pit Kit: Video Instruction

---

Watch time: 5 mins, 40 sec

Add a bold focal point to your outdoor space with the Dimensional Fire Pit Kit. Its modern, square design offers a beautiful finish to your Rosetta patio, and installation is simpler than you might think.

In this video, Rosetta Hardscapes expert Hardscape Nate walks you through the seven steps to install the Dimensional Fire Pit Kit as a wood-burning feature. If you plan to convert it to gas (optional insert sold separately), check out the Dimensional Fire Pit Gas Insert Info Sheet for specific installation guidance.

Dimensional Fire Pit satisfaction in just 7 Steps:

• Prepare the Site Ensure base materials are properly compacted and gather all necessary materials.

• Dry Fit the First Course of Blocks Place the stainless steel insert on your prepared base. Starting in a front corner, begin laying your blocks around the insert. Be sure to maintain a small gap between the blocks and insert to allow for proper air circulation when the fire is burning.

• Check, Adjust, and Level the First Course Use a mallet to make adjustments and ensure tight joints and alignment. Use a level to ensure blocks are flat and even. Remove the insert to continue.

• Install the Second Course Offset the second course to break bond lines. Make adjustments along the way if needed.

• Apply Adhesive Remove blocks one at a time to apply adhesive between the first and second courses. Allow adhesive to set briefly before continuing.

• Add the Third and Final Course Lay all blocks, starting in the opposite orientation and staggering joints. Make adjustments. Apply adhesive and secure the third course to the second.

• Insert the Fire Ring and Finish Your Build Bask in the glow of your patio’s new centerpiece and the realization that you installed it yourself!

Installation simplicity, squared. Learn more about the Dimensional Fire Pit Kit and bring backyard fire feature dreams to life.